Unweeded garden Essay Example for Free

Unweeded garden Essay Although audiences of today have not experienced such a controversy among the royal family as in the 1600s, they would still understand how immoral the marriage between Claudius and Gertrude is and would recognise how it brings instability in the royal household and consequently the state. Although, some of those in a modern audience would see it as an affair too close too home which is likely to cause emotional distress for Hamlet rather than as incestuous. Modern audiences would also understand how the state depends on the control and stability of the royal family. If there is decay and dislocation in the royal family, the state will suffer. Subsequently, the state transforms from a place of peace to an unweeded garden in which there is disorder. This imagery of the unweeded garden clearly illustrates the idea of transformation. Denmark used to be a state where there was control and order, just like a garden. However, the same way a garden that has not been looked after produces weeds, is the same way a country without control creates disorder. This then leads to chaos and finally foul play leaving the state rank and gross in nature. During Hamlet, not only Denmark goes through a transformation, the characters themselves go through a transformation during the course of the play. The language used shows this. Looking at Claudius language in the beginning of the play, it is confident and eloquent. He deals with four items of business: his accession; the threat from young Fortinbras; Laertess suit and Hamlets behaviour. There are no interruptions during the Kings speech other than agreement from his faithful courtiers. However, this only occurs because each of them are involved in the manipulation of the kingdom as they gain great rewards from their king. Each affair is emphasised with a caesura. Taken to wife. underlines that Gertrude is his wife, no questions asked and So much for him. ends all conversation to do with the previous king. Intellectual language is also used filial obligation which shows his authority as king. However, as the play progresses, Claudius character transforms into a different king. During the scene in which Claudius prays for forgiveness, the audience are confronted with a different character. The language here is very unlike the language in the beginning of the play. There are many questions and the character becomes trapped in the language. What then? What rests? What can it not? The language also emphasises the characters now tortured soul as in the syntax Pray can I not instead of I can not pray. It could be argued that as Denmark changes, so does its king. The decay and dislocation of the state has an effect on Claudius and so instead of being in control like before, he is unable to hold the state together. Like Claudius, Hamlet also transforms during the play. One might say that this character is the core concept of transformation. The language in the beginning of the play displays Hamlets weariness conveyed by the listless tempo of the words How weary, stale, flat and unprofitable. The verse starts and stops, punctuated by expressions of pain and confusion: -why, she she married-O most wicked speed! Hamlet transforms from circumstances in which he cannot understand himself or the world he is living in into states of despair or even anger. Hamlet often questions the existence of man what piece of work is a man? and Shakespeare shows the characters incomprehension with long speeches containing long sentences in which there are many questions Hamlet is asking himself such as: What is this quintessence of dust? Shakespeare shows Hamlets despair with dismal consistency of tone and tempo as the character seeks to find out whether he is equal to the task that has been set. This contrasts with scenes in which the language of Hamlet is agitated and irritated. Shakespeare emphasises his disgust with disease imageries referring to prostitutes especially when confronted with Gertrude or Ophelia: you jig, you amble In the closet scene, while Hamlet speaks to his mother, his language transforms once again. The words used are similar to that which a preacher uses for love of grace Confess yourself to heaven repent virtue However, the greatest transformation affecting Hamlet, happens when Hamlet has just returned from England. The encounter with Fortinbras army encourages Hamlet to reflect on the nature of honour and resolves him to have bloody and impulsive thoughts: O, from this time forth My thoughts be bloody or be nothing worth. (iv. iv. 65-4) Hamlet announces: This is I, Hamlet the Dane (v. i. 251-2) And in doing so, he demonstrates that he finally understands who he is and what responsibilities he must uphold. Transformation occurs not only through Denmark but also through the characters. The closing action of the play is the removal of the bodies from the field and this could be seen as the finally transformation. The bodies from the Denmark in which there was corruption and dislocation are removed in order to make way for a new Denmark, a Denmark for the living. Whether this final action determines a positive outcome for the state is for the audience to decide, however, the atmosphere at the end of the play contains some element of hope rather than complete despair as in the opening scene. The theme of transformation therefore introduces and concludes Shakespeares play, Hamlet.

Book Review of People of the Three Fires Essay -- Essays Papers

Book Review of People of the Three Fires The book, People of the Three Fires, is written by three different people each describing a tribe in detail.The book is very well written and relatively easy to understand. It is informative and was written to be used as a teaching tool for schools. The book discusses the relationship between the groups that lived in Michigan and surrounding areas. James M. McClurken writes the first section, which deals with the Ottawa people. McClurken tells about the Ottawa peoples’ relationship with the environment they lived in and how they adapted to change when contacted by Europeans. One thing I found interesting about the Ottawa is their beliefs. The Ottawa believed in respect for the individual. Their leaders represented the people much like our elected officials represent us when a decision is needed for the whole of the country. They are in tune with nature and consider the earth and animals part of their family, addressing them with â€Å"father,† â€Å"mother,† â€Å"brother,† â€Å"sister.† The Ottawa’s also amazed me at their ability to believe in the supernatural, the spirits that told what sickness a person has and the healing power of the firewalkers is a leap of faith. I am always amazed that people survived without Advil and Tums, and they didn’t just survived they thrived! The Ottawa were great traders, in fact they traded all over northern Michigan. A surprising fact I read in the section was of the fleecing of the Indian...

BrimmoThe Curious Incident Of The Dog I

l am going to prove that Im not stupid. Next month am going to take my A level In math's and IM going to get an A grade† / Hidden creates a character with huge contrasts to show the complexity of Aspires. â€Å"and now if I don't know what someone is saying I ask them what they mean or walk away† / Direct speech â€Å"l think it should be called a lie because a pig is not like a day† / direct speech to show the complications. What is a distinctive idea explored In The Curious Incident of the DogIn the Night Time by Mark Haddam? Explain how this Idea Is developed through the novel. The Curious Incident of the dog in the night time composed by Mark Haddam is an exceptional text that explores the ideas of how different perspectives show the different ways the world can be experienced. Hadrons text follows a young boy named Christopher Boone with the uniquely complex disease, speakers, â€Å"speakers† and as he does this he conveys the way someone seeing the wo rld differently can generate different life perspectives.Chris Is unable to understand human emotion ND figurative language and which Haddam cleverly uses this perspective with techniques like using contrast and voicing character's views with direct speech to allow the reader to access the syndrome that is common but rarely understood. Haddam creates a character with huge contrasts to show the complexities of his Speakers syndrome. Haddam uses characterization to portray the complexity of Christopher says â€Å"l am going to prove that I'm not stupid. â€Å"Next month I am going to take my A level In math's and I'm going to get an A grade†.Christopher has an amazing talent in math's and has an exceptional photographic memory. This helps the audience to understand the inner conflicts that Chris has because of the syndrome and understand the huge contrasts between someone that can't understand simple things that most people take for granted and a â€Å"A level in math's†. This contrast also allows the audience to see the complexities of Speakers through the eyes of Christopher and his experiences, developing the unique Idea that different an speakers perspectives show the wildly different ways the world can be experienced.Christopher Bone's syndrome makes him struggle to connect with human emotions as he doesn't understand them. This reveals his deferent views of the world to the audience. Chris has a lack of knowledge of facial expressions and human emotion creates problems in his life where he is left confused and frustrated. â€Å"And now If I don't know what someone Is saying I ask them what they mean or I walk away' The use of direct speech representing the character's thoughts puts the reader in the shoes of Christopher showing his perspective of life.The audience is shown owe his knowledge of emotions is very limited because he would just run away if he was confused about what someone was trying to tell him. Christopher lack of communicati on directly relates to the views him and others have of life because of these barriers. Haddam allows the audience to see the complexities of Speakers different perspectives show the different ways the world can be experienced. Haddam makes the audience appreciate the things we take for granted by exploring the many barriers people with aspires face.Because of Christopher obstacle of understanding figurative language and metaphors it limits his communication. â€Å"l think it should be called a lie because a pig is not like a day' the effective use of direct speech used in this quote, emphasis the complications that follow with Speakers Syndrome. The use of direct speech and persona also allows the audience to see life from his perspective, forcing the audience to understand his syndrome and its effects. This allows the audience to appreciate the things we take for granted developing the idea that different perspectives show the different ways the world can e experienced.The Curiou s Incident of the Dog in the Night Time is an impeccable text that shows the audience what it is like to have Espalier's Syndrome. Mark Haddam uses techniques like direct speech to illustrate how different perspectives show the different ways the world can be experienced. Christopher barriers of not being able to recognize human emotion or figurative language were great tools in broadcasting the theme of how different perspectives show the different ways the world can be experienced to the audience

Just in Time Approach in Inventory Management

2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd JUST IN TIME APPROACH IN INVENTORY MANAGEMENT Abdul Talib Bon (Corresponding author) Faculty of Technology Management, Business and Entrepreneurship Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia Tel: +60127665756 E-mail: [email  protected] com Anny Garai Faculty of Technology Management, Business and Entrepreneurship Universiti Tun Hussein Onn Malaysia, 86400 Batu Pahat, Johor, Malaysia Tel: +60137016298 E-mail: [email  protected] com. y Abstract Quality improvement and costs control are vital to organizations for work performance enhancement and fulfilling customers’ requirement. Inventories that are stored in large amount of quantities will result in waste and space usage. One effective solution is using Just in Time (JIT) concept as a method to reduce costs, improve quality and meet the ever-changing customer needs. The adoption of Just in Time (JIT) con cepts seems to be the most effective way to overcome these circumstances. JIT is management philosophy that emphasizes on eliminating waste and increase productivity.The main purpose of this research is to find out whether the implementation of JIT would reduce the inventories at Electronics component industry especially at the parts producing stamping of FCM. This research is done by case study. Therefore the data collection would be using secondary data which is the documentation from FCM itself and also via observation. The data were analyzed by doing the comparison before and after the implementation of JIT using Microsoft words excel. From the analysis that had been done, the implementation of JIT had increased the inventories management at the stamping parts production.As the conclusion, the implementation of JIT in the inventory management at the parts production stamping at Electronics component industry had successfully reduce the inventories level while improving the inven tory level. Keywords: Stamping Production, Just in Time, inventory management, electronics component industry. 1. Introduction Globalisation phenomena had created the business without boundaries. Most of the organisation nowadays only focuses in two main elements that can influence the global market, which is customer satisfaction and also the product and services quality.Organisation all around the world need to take the initiative to increase the product quality to satisfy the needs and customer demand that always change besides minimizing the production cost. This initiative is needed to keep the challenge at the market (Canel, et al. , 2000). One of the most effective solutions is with the application of Just in Time (JIT). Application of JIT could involve few important elements at organisation such as production level, marketing level, engineering level and purchasing level. The application of JIT more focuses on management process.Therefore, JIT can be applied at varying proce ss. (Canel, et al. , 2000). JIT is the concept of management that invented specially to avoid waste. This is in order to minimize the waste and increase the productivity (Zhu and Meredith, 1995). JIT is one type of Lean Manufacturing (Yen, 2003). Lean manufacturing is the process to control the production which depends on the demand by the customers. It is also act to reduce waste. The application of Lean Manufacturing can reduce the stock, work space and the production of raw materials. This philosophy can maximize the production (Forza, 1996).At Malaysia context, application of JIT is not popular. According to Simpson, et al. , (1998), JIT had been applied by national automotive firm as a transitory JIT. Transitory of JIT is one of the ad hoc inventory models. This is can give half of the inventory in order to reduce the production 2562 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd cost beside can make the technology transfer at the i nternational level. This research is made to study the application of Just in Time (JIT) in inventory management at stamping production at Electronics component industry. 1. Background of Study At FCM there is lot type of inventories and this requires a huge space to restore it. Therefore FCM need to prepare an enough space. How ever, this situation requires FCM to overcome the cost of restore. But this is not the really big issues to FCM. What really worries FCM management is the huge batch of inventories. The batch of inventories had caused FCM loss in profit because there is no moving out of the output to customer. Therefore the cases are also not only arises due to this problem. Besides that, in Japanese firm, the concept of keeping the inventory is a big waste in industry.Based on this problem, Heizer J. & Render B. (2006), Just in Time (JIT) is the best strategy to increase the operation especially at the inventory management. However, if the raw material cannot be delivered d uring the production, there would be a big problem. 1. 2 Problem Statement This study is to elaborate the JIT application in inventory management at the stamping production at FCM. The problems that occur in this study are what is the importance of application of JIT in order to influence the inventory management at the stamping production at FCM? 1. Objective In this research, researcher has the stand to achieve the objective so that it could be archived. The objective is to study the application of Just in Time (JIT) in inventory management at Stamping Production at Electronics component industry. 1. 4 Scope Of Study The scope of study is focused at the stamping production at Electronics component industry. The main products of FCM are keyboard and relays. Respondents that involved are top management and the staff at stamping production of FCM. Data would be collected through qualitative method and be analysed quantitatively.From this study, the researcher hopes that can help Elec tronics component industry on the applications of JIT in their operation. The researcher hopes that with this study, it can help Electronics component industry and academician which is up to the upcoming researchers. 2. Literature Review JIT is not the new concept in production sector (Stevenson, 2001). It started during 1920 and being used by Henry Ford at the automation industrial. JIT is one of the Lean Manufacturing that had been introduced by Toyota Motor Corporation to increase the work quality and production.The application of JIT in Lean Production will give good return in production process. These philosophies would make the production even faster and to reduce the inventories stock. 2. 1 Lean Production and Lean Manufacturing Lean Manufacturing first introduced as systematic ways to reduce or terminate the waste. It is the management philosophy that require commitment from responsible person that relate with reduced waste, make the work procedure become smooth and optimize the production (Chase, et al. , 2001). Lean Manufacturing firstly introduced by the Toyota Motor Corporation.Which is involved the inventory management, quality control, industrial relationship, 2563 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd employee management and relationship between factory and the suppliers (Bowen and Youngdahl, 1998). JIT is one of the elements in Lean Manufacturing meanwhile Lean Production is known as Big JIT. It is the philosophy of management operation that act to terminate the waste in every aspect in production such as industrial relationship, vendor relationship, technology, raw material management and inventories (Chase, et al. 2001). Lean Production can use to reduce time, inventories, space, employees and production cost. 2. 2 Just In Time (JIT) Usually, JIT process being implemented in the organisation that reached the highest application of JIT. Wagner M. S and Silveira- Camargos V , 2009). This is because organisation and the supplier should have a good relationship and believe because when there is demand from factory, the suppliers can supply them on time. The first way to implement JIT is build a good relationship with the suppliers, customers and also sub-contractor to reduce inventory â€Å"buffer† to few hours.According to Canel, et al. , (2000), JIT aims is to reduce time waiting during production process. Therefore, the cost of inventories not only can be minimized but also the time for the production also shortens. JIT concept is not saying about the standardisation or the way of managing but it really focusing on the zero inventories 2. 3 Benefits of Application of Just In Time in Lean Production The application of JIT would give a lot of benefits such as to the producer to increase the quality to fulfil the customer demands and reduce the inventories and built a good relationship with the supplier (Salaheldin, 2005).Positive of JIT application can successfu lly give benefit to three communities, which is supplier only, purchased only or both. The benefits are, reducing in inventories and time waiting for the inventories, increase the quality and technical support, increase productivity, reduce waste and machine maintenance (Wafa, et al. , 1996). JIT actually help to reduce machine maintenance and at the same time, to make sure the suppliers can produce the inventories on time (Yasin, et al. , 2001). According to Yasin, et al. 2002), the big problem of JIT application is employer issues and the suppliers. Employer issue is about the objection of JIT concept, less supportive of JIT and less of employees. 3. Methodology This study is using action research that is descriptive and makes the research by quantitative. In this study, researcher would use observation and data collection from the result of the observation. 4. Data Analysis 4. 1 Introduction This chapter would discuss and analysis the data that had been collected from FCM.There a re four different data that had been provided by the researcher according to the case. For the first case, the researcher would get the standard time during the raw material collected from the rack and the replace at the turn table using forklift. The second case is the machine die setup. Meanwhile the third case is standard time for winding process. The time is counted during the winding process and the material place at the stand before and after the winding process. For the last case, is during packing and deliver the part to the warehouse.This chapter also would discuss about type of test and analysis to the case to make sure that the data is valid and researcher can get a clear vision about the elements of Just in Time (JIT) being implemented by the FCM. 2564 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd 4. 2 Results of Study In this study, researcher would discuss the results that researcher gets from the study. All the data that had been collected by the researcher would be divided according to the case and according to the flow chart of stamping production refer to Figure 1.Figure 1 shows Standard Time (ST) and Cycle Time (CT) according to the cases that had been studied. ST = 10. 8 min CT = 10 times ST = 480 min ST = 5. 37 min ST = 17 min KES 1 KES 2 KES 3 KES 4 Raw Material Stamping Process Winding Packing Warehouse Figure 1: Stamping Flow Chart 4. 2. 1 Analysis of Case 1 This section would show the data collected from case 1 for the application before and after the part production stamping. In this case 1 (refer Figure 2) the standard time would be the counting from the raw materials from the racks to the turntable using forklift and then the return back of the forklift to the place.Refer from Figure 3 as shown the graphs for before and after the applications of JIT for case 1. ST/CT Raw Material Stamping Process Figure 2: Case 1 2565 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd Figure 3: Graph Before and After Application of JIT (Case 1) 4. 2. 2 Analysis of Case 2 For case 2, (refer Figure 4) is to reduce the standard time that is using for die setup. Figure 5 showed the graph before and after application of JIT. . ST Stamping Process Figure 4: Case 2 Winding 2566 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING d nd Figure 5: Graph Before and After Application of JIT (Case 2) 4. 2. 3 Analysis Case 3 For case 3, (refer Figure 6) is to reduce standard time for winding process. Figure 7show before and after application of JIT for Case 3. ST Winding Figure 6: Case 3 Packing 2567 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd Figure 7: Graph Before and After Application of JIT (Case 3) 4. 2. 4 Analysis Case 4 For case 4, (refer Figure 8) is to reduce standard time during packing and deliver to warehouse. Figure 9 show the application of JIT before and af ter. ST PackingFigure 8: Case 4 Warehouse 2568 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd Figure 9: Graph Before and After Application JIT (Case 4) 5. Conclusion The purpose of this study is to make sure the application of concept Just In Time (JIT) at Electronics component industry especially at the stamping production. This chapter would discuss about the results of the analysis according to the objective and problem statement. The discussion would focus in certain case at stamping production depend of the results that analyze from before and after the application of JIT.Besides that, this chapter also would discuss the suggestion. After the analysis, application JIT in inventory management at stamping production is depend on the activities below: (i) (ii) (iii) (iv) (v) (vi) (vii) (viii) (ix) Raw material always in enough quantities. Work in process always at the minimum quantities. Finished good would directly deliver to buyers. Wasting work in process seldom occur. Buffer stocks always at the minimum quantity. Delivering raw material depends on demand only. Space for inventories is small. Time table scheduling is made by the suppliers.Delivering materials is more often and only at small size. 2569 2 INTERNATIONAL CONFERENCE ON BUSINESS AND ECONOMIC RESEARCH (2 ICBER 2011) PROCEEDING nd nd (x) (xi) (xii) Long term relationship is built between suppliers. Suppliers is advised to use the application of Just in Time (JIT) , and The employers should give the commitment on inventories and quality. Besides that, researcher has little suggestion to the upcoming interested researchers with the concept of Just in Time. The suggestions are: (i) this research only limited at one factory which is Electronics component industry.The next researcher should broaden their scope of study; (ii) Future study on the application of JIT concept especially in the purchasing and engineering level; and further study about the elemen ts associated with JIT. References Bowen, D. E. & Youngdahl, W. E. (1998). Lean Service: In Defence of A Production-Line Approach. International Journal of Service Industry Management. 9(3). 207-225. Canel, C. , et al. (2000). Just-in-time Is Not Just for Manufacturing: A Service Perspective. Industrial Management and Data System. 100(2). 51-60 Chase R. B. , et al. (2001). Operations Management for Competitive Advantage. th ed. N. Y. : McGraw-Hill. 394-417. Forza, C. (1996). Work Organization in Lean Production and Traditional Plants: What Are the differences?. International Journal of Operation and Production Management. 16(2). 42-62. Salaheldin, S. I. (2005). JIT Implementation in Egptian Manufacturing Firms: Some Emperical Evidence. International Journal of Operation and Production Management. 25(4). 354-370. Simpson, M. , et al. (1998). Case Study: Transitory JIT as Proton Cars, Distribution and Logistics Management. 28(2). 121-142. Malaysia. International Journal of Physical St evenson, G. (2001).Just-in-time: The Reincarnation of Past Theory and Practice. Management Decision. 39(10). 866-879. Wafa, M. A. , et al. (1996). The Impact of Supplier Proximity on JIT Success: An Information Perspective. International Journal of Physical Distribution and Logistics Management. 26(4). 23-34. Yasin, M. Y. , et al. (2001). Just-in-time Implementation in the Public Sector. International Journal of Operation and Production Management. 21(9). 1195-1204 Zhu, Z. & Meredith, P. H. (1995). Defining Critical Elements in JIT Implementation: A Survey. Industrial Management and Data System. 95(8). 21-28. 2570

Criminal Tendencies essays

Criminal Tendencies essays Say the word marijuana and people immediately associate it with something: crime, druggies, lack of motivation, or other negative connotations. For far too long in American culture millions have believed propaganda about marijuana, spread by the government, without ever educating themselves. Marijuana, which comes from the cannabis plant, is not nearly as harmful as it has been made out to be. Opponents scream that smoking pot kills brain cells and gives cancer to users. Alcohol kills brain cells, is an addictive drug, and is legal. Tobacco gives cancer to users, is an addictive drug, and is legal. Pot smokers are often stereotyped as being unmotivated, burned out failures, despite many avid users from all avenues of life. Success depends on the individual, not the hobby in which they indulge. Furthermore, many events, including movies, music, and even sex can be enhanced through the euphoric feeling attained by smoking cannabis. Essentially, smoking marijuana is a victimles s crime that enhances everyday activities without hindering personal successes. Marijuana, when inhaled, gives the user a euphoric feeling which includes an altered perception of time and distance, intensified sensory experiences, and increased laughter. Ironically, euphoric is defined as a greater state of happiness and stems from the Latin word euphoros, meaning healthy. It was legal in this country until 1937, when the government passed the Marijuana Tax Act, which required tax stamps to obtain marijuana that were never supplied. The government feared that cannabis would compete with newly invented synthetic fiber, and thus they began spreading negative propaganda about marijuana. Because of this propaganda, peopl associate marijuana with harsher illegal drugs such as cocaine and heroin. However, it is important to separate marijuana from this group. Marijuana is naturally grown, harvested, dried, and smoked, much like tobacco. Cocaine and ...

How to Study the Night Before a Test

How to Study the Night Before a Test Theres no need to feel completely frightened if youve procrastinated until the night before a test to study. Although you wont be able to commit much to long-term memory in a one-night cram session, you can learn enough to pass the test using these techniques. How to Study the Night Before a Test Eat a nutritious meal and prepare a few healthy snacks so you wont need to get up laterSet up in a comfortable spot with your study materials (pencils, note cards, highlighters) and class materials (notes, quizzes, tests, handouts, study guides)Focus for 30 to 45 minutes, then break for 5Take notes and use mnemonic devices to improve recallAim for comprehension over memorizationExplain concepts and ideas to a third partyGet a good nights sleep Physical Needs The brain and the body are linked, so before you sit down to start a study session, its a good idea to take care of your body: go to the bathroom, get some water or tea, and be sure youre dressed in a way that wont distract you (nothing scratchy or stiff). Focus and calm are crucial to studying seriously; to get your body on the same page, try doing some deep breathing and yoga stretches to help you get your mind off any other concerns. Essentially, this prep is meant to get your body to help you, not distract you, so you have no excuses to break your study focus. Snacking during or before studying can be helpful, but choose wisely. The ideal meal is something without a lot of sugar or heavy carbs that can lead to an energy crash. Instead, grab some high-protein grilled chicken or scramble some eggs for dinner, drink green tea with acai, and follow it all with a few bites of dark chocolate. Its always easier to stay on task and process information when your brain has been given what it needs to function properly. The other upside is that by eating something before you begin studying, youll be less tempted to get hungry (and distracted) and quit studying early. To further head off any distracting snack attacks, be prepared ahead of time. When you go to your study area, bring a snack with you. This should be something high in nutrients and mess-free, like mixed nuts, dried fruit, or a protein bar. Avoid highly processed foods like chips, and beware of sneaky foods like granola bars that are full of hidden sugar that will leave you stranded in an hour or so. One Step at a Time Start by getting organized. Get all the materials that relate to the test youre taking- notes, handouts, quizzes, book, projects- and lay them out neatly in a way that makes sense to you. You might organize them by topic, in chronological order, or in some other way that works. Perhaps you like to use color-coded highlighters or stacks of notecards. The point is that theres no one way to organize: You have to find the best system that helps you make connections with the material. By the night before a test, you should already have a good baseline of knowledge on the test topics. That means your goal here is to review and refresh. If your teacher gave you a study guide, start with that, quizzing yourself as you go along. Refer to your other materials if you cant remember an item on the guide, and then write it down. Use mnemonic devices to help you remember bits of information that you wouldnt otherwise, but try to avoid just memorizing everything: its harder to recall straight facts than it is to have a network of connected ideas that you can rely on. If you dont have a study guide or if youve finished going over it, prioritize notes and handouts. Things like dates, names, and vocabulary words are likely to show up on tests, so study those first. After that, review the bigger-picture stuff: material that covers cause-and-effect relationships within the topic area and other ideas that could show up on an essay question. For these, memorization is less important than having a solid enough understanding to explain it back on a written answer. It can seem overwhelming, especially if you have a lot of material to review, so take it slowly. A good rule of thumb is to focus for 30- to 45-minute increments followed by 5-minute breaks. If you try to cram in all the information the night before the test, your brain will overload and youll have to work to regain your focus on studying. This is why its also useful to review for a few days before the test, not just the night before so you can spread out the material and review everything multiple times over of a few separate sessions. Buddy System If you really want to test your understanding of the material, try explaining it to someone who isnt in the class. Get a family member or friend and teach them as much as you can remember. This will let you see how well you understand the concepts and how well you can make connections (to prepare for short-answer or essay questions). If you have a partner or a family member to help you, have them quiz you on the material. As you go, make a list of anything you get stuck on or cant remember. Once youve been quizzed, take your list and study that material repeatedly until youve got it. Finally, write down all your mnemonic devices, important dates, and quick facts on one sheet of paper, so you can refer to it the morning before the big test. Final Preparations Nothing will make you do worse on a test than pulling an all-nighter. You may be tempted to stay up all night and cram in as much as is possible, but by all means, get some sleep the night before. When testing time comes, you wont be able to recall all the information you learned because your brain will be functioning in survival mode. On the morning of the test, make sure to eat a healthy breakfast for plenty of energy. Throughout the morning, run through your review sheet: while youre eating, at your locker, or on the way to class. When it comes time to put the review sheet away and sit down for the test, you can rest easy knowing that youve done everything possible to help your brain get through the test with flying colors.

Support of President Obama's Jobs Bill Essay Example | Topics and Well Written Essays - 1000 words

Support of President Obama's Jobs Bill - Essay Example While touring the nation in the recent weeks, President Obama had repeatedly demanded that Congress passing the bill intact; thus, the Senate’s vote to impede the measure signified a serious setback and occurred after leaders of his own party had modified the measure to comprise surtax on revenue of not less than $1 million to summarize additional Democratic votes. Following this setback, the president condemned the Republicans fro shying away from a measure, which entailed ideas they had previously supported (DeMint 65). In a statement before the vote, the president told the Senate that the vote did not signify the end of this fight since days were coming when members of Congress will be required to take a stand about the bill after carefully analyzing the benefits it brings especially to those who are poorly paid like teachers, policemen and firefighters (DeMint 46). According to Senate Democratic aides, votes on parts of the bill could start this month, or even as early as next week; with party leaders saying that they required to consult their conclave before deciding on the timing or choosing the conditions to be reflected on separately (DeMint 38). There were a number of Democratic senators who asserted they might connect with a few Republicans in looking for job-creation proposals, which might achieve bipartisan support; this is an alarming contest in a chamber whereby comity appears to worsen weekly. On the other hand, House Republican leaders have asserted that they have no intentions of taking the president’s bill in its entirety; rather, they accept the sign from the White House, which indicates that the administration might be ready for a piecemeal effort (Kent). Eric Cantor, who is the House majority leader, as well as the Republican of Virginia, alleged that he was hoping that the president would dismiss his all-or-nothing methodology and start working with the Congress on issues of commonality, comprising of initiatives, which could uphold hiring along with economic growth. Mr. Cantor added, â€Å"We are willing to take up the things we can agree on.† This job’s bill is a combination of public works expending, as well as temporary tax cuts, whose intention are to counter what Mr. Obama refers to as an economic disaster and an emergency. Senate Democrats attempted to make the president’s bill more acceptable by attaching a surtax of 5.6 percent, beginning in 2013, on revenue in surplus of $1 million. As the Senate headed for the vote, Mr. Reid was overheard making allegations that Republicans were in opposition of the president’s jobs bill due to political reasons since they desired for the economy to continue being in poor shape. Mr. Reid claimed that Republicans thought that if the economy gets better, then this might assist President Obama, and that is why they campaign for the economy to fail by opposing every effort of improving it (DeMint 30). Mitch McConnell of Kentucky, who i s the Senate Republican leader, replied in saying that Democrats had prepared this bill for failure, hoping that anyone voting against it will be perceived as a bad person; and that the exercise in its entirety is only a charade, which is meant to offer Democrats with a political edge in the forthcoming